Features of BP-MSA1 UVC Hyper Light Disinfection Robot-Maya
Hyper light disinfection robot Maya is equipped with eight 55W UVC lamps, Maya is equipped with eight 55W ultraviolet lamps,
six of which are placed on the outside of the robot-like Bondi, directly disinfecting the environment.
The other two lamps are built-in, air would be sucked in through a fan, and be disinfected by the built-in lamps.
Maya is equipped with eight 55W ultraviolet lamps, six of which are placed on the outside of the robot-like Bondi,
directly disinfecting the environment. The other two lamps are built-in, air would be sucked in through a fan,
and be disinfected by the built-in lamps. The disinfection process of the built-in lamps can be carried out in a human environment.
In order to ensure the battery life of the eight lamps and the fan running at the same time, Maya has also upgraded the battery,
using a large-capacity battery of 100Ah, and the whole robot has a battery life of 5 hours.
Maya has high efficient disinfection function. It takes at most 8mins for a 20㎡room.
All disinfection data are traceable by emailing reports after Maya completes the disinfection tasks.
Working Modes of BP-MSA1 Disinfectant Robots - Maya
There are two working modes of Maya, air circulating disinfection (Air Mode) and UV disinfection (Direct Mode). Maya has 6 external UVC lamps. When under the direct mode, the 6 lamps will be turned on to efficiently disinfect the environment and the object surface. We all know that people cannot be present during ultraviolet disinfection as direct exposure to ultraviolet rays will cause damage to the human body. Therefore, hyper light disinfection robot Maya also has an air mode, which uses two embedded ultraviolet lamps to proceed ac duct cleaning and disinfection. This not only ensures a good disinfection effect but also realizes the coexistence of man and UVC robots.
Advantages of BP-MSA1 Cleaning Robot For Public Places-Maya
Maya, the autonomous uv disinfection robot, is installed with Lidar, IMU, Ultrasonic Sensor, Depth Camera, to recognize and avoid obstacles and recesses on its way,
avoid affecting the normal order in public places.
Maya has a voice prompt, to assure no one in the room, and then start disinfection work.
When doing fixed-point disinfection, hyper light disinfection robot Maya would turn off once a person is detected by Maya's motion sensor, so that to assure no human be harmed by the UV-C.
Maya's disinfection process of the built-in lamps can be carried out in a human environment.
Specification of BP-MSA1 UVC Disinfectant Robots-Maya
Intel® J1900 Quad-core 2.0Hz
Total UV-C Lamp Power
Up to 9,000 Hours
Obstacle Climbing Ability
Obstacle Crossing Ability
Wireless（Wi-Fi & 5G Based）